HeavyEquipmentFix
Ask

CAT Fault Codes List: FMI 05 to TH514

Page 83 of 83 of the full CAT fault code list (8,286 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

CAT codes FMI 05 to TH514

  • FMI 05Current Below Normal
  • FMI 06Current Above Normal
  • FMI 07Not Responding Properly
  • FMI 08Abnormal Frequency, Pulse Width, or Period
  • FMI 09Abnormal Update Rate
  • FMI 10Abnormal Rate of Change
  • FMI 11Other Failure Mode
  • FMI12• Aftertreatment hydrocarbon doser clogged • DieselParticulateFilter(DPF)catalyst damaged • DieselParticulateFilter(DPF)catalyst clogged
  • FMI 13Out of Calibration
  • FMI 14Special Instruction
  • FMI15• Faulty EGR Temperature Sensor connector • Faulty EGR Temperature Sensor harness • FaultyEGRTemperatureSensor
  • FMI16• Extremelycoldambienttemperatures • PTO operated with limited exhaust temperatures • Engineturbocharger • Engine turbocharger compressor bypass valve
  • FMI17• Faulty EGR Temperature Sensor connector • Faulty EGR Temperature Sensor harness • FaultyEGRTemperatureSensor
  • FMI18• DEFtanklevelsensorstuck • DEFsystemclog • WrongDEFtank • Aftertreatment DEF Dosing Module failureorwrongmodule
  • FMI 19Data Error
  • FMI 20Data Drifted High
  • FMI 21Data Drifted Low
  • FMI31• MILilluminated • Yellow Check lampilluminated • NoAftertreatment Diesel Exhaust Fluid (DEF) dosing
  • Ga28WH ENGINE PRESSURE SENSOR +SV
  • J114OOOOC~'*>PE]< 000002311 CO o "f o ~OOOO14 / °sLIII
  • J1567DATA LINK+
  • J1587/ J1708) Data Link Circuit - Test". switch is turned to the OFF position.
  • J1922DATA LINK NEGATIVE Gy---I< ] 34 <- J1939 DATA LINK POSITIVE
  • J1939data link, if the instrument cluster is capable For vehicle speed problems on trucks that are
  • J406This connector is for the remote accelerator
  • JERD2124"Electronic Technician Program" (Cat ET)
  • MAR99and newer software
  • N/ADiesel Particulate Filter Differential Pressure (bank 1) : Data Drifted High
  • NOV01and newer software This is the maximum vehicle speed for setting or
  • NOV99and newer software temperature. If the sensor is not installed, a
  • OCT99and newer software
  • OOT99and older software
  • P203J203 -t"-'-G828-WH'~__I2~ENGINE PRESSURE SENSOR +5V
  • P300connector for the suspect solenoid and
  • PO000,Nooo (( r. ) )136OOOO oooo;; cl I
  • RS232serial port of PC (1).
  • TH336TDE00100 & After
  • TH337TDF00100 & After
  • TH406TBX00100 & After
  • TH407TBY00100 & After
  • TH414TBZ00100 & After
  • TH417TBT00100 & After
  • TH514TBW00100 & After
Looking for a different CAT code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Other Caterpillar machine types

Fault code lists by brand