HeavyEquipmentFix
Ask
Diagnostics

Doosan Fault Codes List & Code Lookup

Look up 389 Doosan fault codes and error codes, in plain English. Find your code below, then hand it to the AI assistant for what it means and the first things to check.

Full Doosan fault code list

A generic J1939 reader pulls 75 of these; the other 314 need Doosan tooling to read in full. Every listed code is below, in code order, 100 to a page.

Codes on file

389

Readable as J1939 SPN/FMI

75

Doosan-specific

314

  • 000028.03Throttle voltage high detected.
  • 000028.04Throttle voltage low detected.
  • 000029.03Throttle voltage high detected.
  • 000029.04Throttle voltage low detected.
  • 000029.14Throttle voltage out of range.
  • 000084.31Vehicle speed mismatch detected.
  • 000091.03Throttle voltage high detected.
  • 000091.04Throttle voltage low detected.
  • 000091.07Throttle calibration invalid.
  • 000091.10Throttle voltage low detected.
  • 000091.13Throttle calibration aborted.
  • 000091.14Throttle voltage out of range.
  • 000097.00Water in fuel continuously detected.
  • 000097.03Water in fuel signal voltage high.
  • 000097.04Water in fuel signal voltage low.
  • 000097.16Water in fuel detected.
  • 000097.31Water in fuel detected (750J Crawler Only).
  • 000100.01Engine oil pressure extremely low.
  • 000100.03Engine oil pressure input voltage high.
  • 000100.04Engine oil pressure input voltage low.
  • 000100.16Engine oil pressure high, moderately severe.
  • 000100.18Engine oil pressure moderately low.
  • 000105.03Manifold air temperature input voltage high.
  • 000105.04Manifold air temperature input voltage low.
  • 000105.16Manifold air temperature moderately high.
  • 000110.00Engine coolant temperature extremely high.
  • 000110.03Engine coolant temperature input voltage high.
  • 000110.04Engine coolant temperature input voltage low.
  • 000110.15Engine coolant temperature high, least severe.
  • 000110.16Engine coolant temperature moderately high.
  • 000111.00ECU derates engine 20% until 60% power
  • 000111.03Coolant temperature input voltage high
  • 000111.04Coolant temperature input voltage low
  • 000158.17ECU power down error
  • 000160.02Wheel speed input noise
  • 000171.03Ambient air temperature input voltage high
  • 000171.04Ambient air temperature input voltage low
  • 000174.03Fuel temperature input voltage high
  • 000174.04Fuel temperature input voltage low
  • 000174.16Fuel temperature high moderately severe
  • 000189.00Engine Speed Derate active
  • 000190.00Engine Overspeed detected
  • 000190.01Engine speed below normal operational range, severe
  • 000190.16Engine Overspeed detected
  • 000190.18Engine speed below normal operational range, moderate
  • 000523.09Current gear selection invalid
  • 000620.03Sensor Supply Voltage Too Long
  • 000620.04Sensor supply voltage low
  • 000629.13ECU error
  • 000637.02Crank position input noise
  • 000637.10Crank position input pattern error
  • 000639.13CAN bus error
  • 000644.02External speed command input
  • 000729.03Inlet air heater signal high
  • 000729.05Inlet air heater signal low
  • 000898.09Vehicle speed or torque message invalid
  • 000970.31Auxiliary engine shutdown switch active
  • 000971.31External engine derate switch active
  • 001069.31Tire size error
  • 001076.00Pump control valve closure too long
  • 001076.01Pump control valve closure too short
  • 001076.03Pump solenoid current high
  • 001076.05Pump solenoid circuit open
  • 001076.06Pump solenoid circuit severely shorted
  • 001076.07Pump control valve closure not detected
  • 001076.10Pump solenoid circuit moderately shorted
  • 001076.13Pump current decay time is invalid
  • 001079.03Sensor supply voltage is high
  • 001079.04Sensor supply voltage is low
  • 001109.31Engine protection shutdown warning
  • 001110.31Engine protection shutdown
  • 001569.31Fuel derate active
  • 002000.06Internal ECU failure
  • 002000.13ECU derates engine 20% until 80% power
  • 03Coolant temperature input voltage is high.
  • 04Coolant temperature input voltage is low.
  • 05Inlet air heater signal is low.
  • 07Throttle calibration is invalid.
  • 09Throttle signal is invalid.
  • 10Engine not responding to throttle command.
  • 100Engine Oil Pressure Problem
  • 101P0203 653 5 Injector Open circuit Fault (Cylinder #3) ON No
  • 102Injector High Low side Short circuit Fault (Cylinder #3)
  • 103Injector Code(IQA) Program Missing Fault (Cylinder#4)
  • 104P02F1 654 4 Injector Short circuit Fault (Cylinder #4) ON No
  • 105Manifold Air Temperature Problem
  • 106Injector High Low side Short circuit Fault (Cylinder #4)
  • 107Glow plug Relay driver Short circuit to Battery Fault
  • 108Glow plug Relay driver Short circuit to Ground Fault
  • 109P0380 676 5 Glow plug Relay driver Open circuit Fault ON No
  • 109.9High fuel pressure warning.
  • 110Engine Coolant Temperature Problem
  • 112P028E 975 3 PWM FAN Output short to battery circuit fault ON No
  • 113P028D 975 4 PWM FAN Output short to ground circuit fault ON No
  • 1136Engine ECU Temperature High
  • 114P028A 975 5 PWM FAN Output open circuit fault ON No
  • 116P192F 987 4 CE(Check engine) Lamp Short to Ground ON No
  • 117P192E 987 5 CE(Check engine) Lamp Open circuit ON No
  • 118Fuel Metering unit plausibility error in overrun mode
  • 119P0003 1076 4 Fuel Metering unit plausibility error in idle mode ON Used

Other Doosan machine types

Fault code lists by brand

Looking for a different Doosan code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.