Challenger Tractor Fault Codes List: 6185 to 8.X.16
Page 9 of 25 of the full Challenger Tractor fault code list (2,434 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.
Challenger Tractor codes 6185 to 8.X.16
- 6185CAB61 - PTO Control Module
- 6186CAB61 - PTO Control Module
- 6188CAB61 - PTO Control Module
- 61A1PTO Error Codes - PTO On/Off Switch
- 61B5PTO Error Codes - Neutral Switch On PTO Control Module
- 61B6PTO Error Codes - 540 Rpm Speed Switch On PTO Control Module
- 61B7PTO Error Codes - 540E RPM Speed Switch on PTO Control Module
- 61B8PTO Error Codes - 1000 Rpm Speed Switch On PTO Control Module
- 61E0CAB54 - Autotronic 4
- 61E1CAB54 - Autotronic 4
- 61ERRX123 - High/Low Speed Range (Hare/Tortoise) Shift Switch has Been Activated
- 62X130 - Fingertip 6 Front Linkage Function
- 6205 VDC Supply Error, High (> 5.2V)
- 626Grid Heater
- 629Power On Self-Test Error
- 62ERRX123 - High/Low Speed Range (Hare/Tortoise) Shift Switch is Faulty
- 63Drain Solenoid Valve
- 639CAN Bus
- 63ERRThe Range Position Sensor is Not in Neutral Due to the Calibration of the Range Position Sensor
- 64Drain Solenoid Valve
- 64ERRElectrical Fault with XII - Solenoid Valve Limiting Speed to 30 Km/h.
- 65Drain Solenoid Valve
- 651Injector No. 1
- 652Injector No. 2
- 653Injector No. 3
- 654Injector No. 4
- 655Injector No. 5
- 656Injector No. 6
- 677Starter Relay
- 6.X.01X128 - Rear PTO Engagement Switch
- 6.X.02X94 - Rear PTO External Switch Right
- 6.X.03X94 - Rear PTO External Switch Right
- 6.X.04X7 - Rear PTO Solenoid Valve
- 6.X.05X15 - PTO Clutch Speed Sensor
- 6.X.06X7 - Rear PTO Solenoid Valve
- 6.X.07X7 - Rear PTO Solenoid Valve
- 6.X.08Excessive Drop in Engine Speed when Engaging the Power Take-Off
- 6.X.09PTO Switch is Activated but the PTO is Not Activated
- 6.X.10X16 - PTO Output Shaft Speed Sensor
- 6.X.11X118 - Automatic Power Take-Off Switch
- 6.X.12Rear Power Take-Off Neutral Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.13Rear Power Take-Off 540 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.15X717 - Linkage and Power-Take Off Keypad on Pillar
- 6.X.16X717 - Linkage and Power-Take Off Keypad on Pillar
- 6.X.17Rear Power Take-Off 540 rpm ECO Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.18Rear Power Take-Off 1000 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.19Rear Power Take-Off 1000 rpm ECO Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.1AX3 - TechStar CVT 540 Rpm PTO Speed Solenoid Valve
- 6.X.1BX3 - TechStar CVT 540 Rpm PTO Speed Solenoid Valve
- 6.X.1CX599 - PTO Speed Solenoid Valve (540 rpm)
- 6.X.1DX3 - TechStar CVT 540 Rpm PTO Speed Solenoid Valve
- 6.X.41X128 - Rear PTO Engagement Switch
- 6.X.42X94- PTO Switch on Left-Hand Fender
- 6.X.43X94- PTO Switch on Left-Hand Fender
- 6.X.45X15 - PTO Clutch Speed Sensor
- 6.X.49X592 - Position Switch for the Rear PTO 540/100 Speed
- 6.X.4AThe PTO Speed Engaged Does Not Match the Selected Speed
- 6.X.50X16 - PTO Output Shaft Speed Sensor
- 6.X.55Rear Power Take-Off Neutral Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.56Rear Power Take-off 540 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.57Rear Power Take-Off 540 rpm ECO Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.58Rear Power Take-Off 1000 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.59Rear Power Take-Off 1000 rpm ECO Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.60X16 - PTO Output Shaft Speed Sensor
- 6.X.A1X128 - Rear PTO Engagement Switch
- 6.X.B0X128 - Rear PTO Engagement Switch
- 6.X.B5Rear Power Take-Off Neutral Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.B6Rear Power Take-Off 540 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.B7Rear Power Take-Off 540 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.B8Rear Power Take-Off 1000 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.B9Rear Power Take-Off 1000 rpm Switch of X717 - Linkage and PTO Keypad on Pillar
- 6.X.E0X174 - EXT Lite Transmission Controller (96-Pin) for TechStar CVT Transmission
- 6.X.E1X174 - EXT Lite Transmission Controller (96-Pin) for TechStar CVT Transmission
- 6.X.E2Engine Speed Too High (>1780 rpm) in Economy Power Take-Off Mode
- 6.X.E3X7 - Rear PTO Solenoid Valve
- 6.X.E4X174 - EXT Lite Transmission Controller (96-Pin)
- 6.X.E5X174 - EXT Lite Transmission Controller (96-Pin) for TechStar CVT Transmission
- 6.X.E6X174 - EXT Lite Transmission Controller (96-Pin) for TechStar CVT Transmission
- 6.X.E7Checksum Error for the Operating Temperatures and the Clutch Times of the Rear Power Take-Off
- 6.X.E8X174 - EXT Lite Transmission Controller (96-Pin) for TechStar CVT Transmission
- 6.X.E9GSPTO Error
- 6.X.EBX174 - EXT Lite Transmission Controller (96-Pin)
- 7Measured Current > Maximum Possible (1.4 A)
- 71TR34 - 18 Bar (261.07 lbf/in2 (PSI)) Pressure Switch on Brake Assistance Supply
- 72Filling Solenoid Valve
- 723Camshaft Speed Sensor
- 729Grid Heater
- 73Status Switch (Engaged/Disengaged)
- 74Status Switch (Engaged/Disengaged)
- 75Wear Switch
- 76Electromechanical Switch on Power Control Lever
- 8Measured Current > Maximum Possible (1.4 A)
- 8-1X121 - Rear Linkage Height/Depth Adjustment Thumb Wheel
- 8-2X121 - Rear Linkage Height/Depth Adjustment Thumb Wheel
- 84Speed Sensor
- 898Speed Requested by the CAN Out of Range, High (>3000 Rpm)
- 8.X.10X27 - Rear Linkage Lifting Solenoid Valve
- 8.X.11X28 - Rear Linkage Lowering Solenoid Valve
- 8.X.12X27 - Rear Linkage Lifting Solenoid Valve
- 8.X.16X177 - Linkage Controller
Other Challenger machine types
Fault code lists by brand
- CAT8,286 codes
- Volvo6,508 codes
- New Holland Tractor3,475 codes
- FPT3,033 codes
- Case IH2,992 codes
- Bobcat2,653 codes
- New Holland Combine2,274 codes
- John Deere Tractors1,884 codes
- Case Wheel Loader1,859 codes
- John Deere Engines1,853 codes
- Cummins1,847 codes
- Volvo Wheel Loader1,726 codes
- Deutz1,684 codes
- Perkins1,523 codes
Safety-critical: confirm before use
Safety first: park on level ground, stop the engine, and secure the machine before any inspection. Thresholds, component locations, wire numbers, fuse locations, and reset procedures can vary by model, configuration, and serial number. Confirm them in the service documentation for your exact machine.