HeavyEquipmentFix
Ask

Hyundai Fault Codes List: 522609 to P0113

Page 2 of 3 of the full Hyundai fault code list (251 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

Hyundai codes 522609 to P0113

  • 522609Y_ETCP1 reception timeout
  • 522610CAN 1 EGR data length code error
  • 522611Exhaust throttle CAN reception timeout
  • 522617EGR low temperature thermistor error
  • 522618EBC1 reception timeout
  • 522619Y_DPFIF reception timeout
  • 522623Dual accelerator sensor error (open)
  • 522624Dual accelerator sensor error (closed)
  • 522730Immobilizer error due to CAN communication
  • 522744Actuator drive circuit 1 short to ground
  • 522746EGR target value out of range
  • 522747Exhaust throttle voltage fault
  • 522748Exhaust throttle motor fault
  • 522749Exhaust throttle sensor system fault
  • 522750Exhaust throttle PCB fault
  • 522751Exhaust throttle CAN fault
  • 522994Actuator drive circuit 2 short to ground
  • 523249Crankshaft/camshaft sensor non-input
  • 523460Operation time error during RPS limp home
  • 523462Injector No.1 correction value error
  • 523463Injector No.2 correction value error
  • 523464Injector No.3 correction value error
  • 523469Rail pressure fault (PLV valve opening error)
  • 523470Rail pressure fault (PLV valve opening error)
  • 523471Actuator drive circuit 3 short to ground
  • 523473AD converter fault 1
  • 523474AD converter fault 2
  • 523475External monitoring IC and CPU fault 1
  • 523476External monitoring IC and CPU fault 2
  • 523477ROM fault
  • 523478Shutoff path fault 1
  • 523479Shutoff path fault 2
  • 523480Shutoff path fault 3
  • 523481Shutoff path fault 4
  • 523482Shutoff path fault 5
  • 523483Shutoff path fault 6
  • 523484Shutoff path fault 7
  • 523485Shutoff path fault 8
  • 523486Shutoff path fault 9
  • 523487Shutoff path fault 10
  • 523488Recognition error of engine speed
  • 523489Rail pressure fault (actual pressure too high)
  • 523491Injector B/F temperature error during PLV4 limp home
  • 523498Controlled rail pressure error after PLV valve opening
  • 525Ram lock solenoid circuit current low
  • 530Travel fwd pilot pressure sensor data exceeds normal range.
  • 531Travel R pilot pressure sensor data high
  • 551Clutch cut off mode selector circuit voltage high or open
  • 552Transmission shift mode selector circuit voltage high or open
  • 558Differential lock pressure sensor data high or open
  • 630EEPROM memory deletion error
  • 633SCV H side VB short circuit
  • 651Injector 1 fault in cylinder 4
  • 652Injector 4 fault in cylinder 3
  • 653Injector 2 fault in cylinder 2
  • 654Injector 3 fault in cylinder 1
  • 70Def/Adblue® system fault detected.
  • 701Hour meter circuit voltage below normal.
  • 705MCU input voltage is high.
  • 707Alternator node I voltage low or open
  • 714Acc. dial circuit voltage above normal.
  • 715Rotate signal input circuit voltage high
  • 716Tilt signal input circuit voltage high
  • 722Travel alarm circuit voltage high
  • 723Buzzer circuit voltage high or open
  • 727Wiper relay circuit voltage low or open
  • 728Boom position sensor signal circuit voltage high or open
  • 729Bucket position sensor signal circuit voltage high or open
  • 730APTC heater PWM output duty operation error
  • 830MCU internal memory error
  • 831A/C controller communication data error
  • 840Cluster communication data error.
  • 841ECM communication data error.
  • 842TCU communication error
  • 843CAN 2 communication data error detected.
  • 844Monitor communication error
  • 850RCM communication data error detected.
  • 85202-1Hydraulic temperature sender fault detected.
  • B1346Airbag system resistance issue detected.
  • B1462Power line fault detected
  • C1201ABS control module or sensor issue.
  • F02Ambient temperature sensor short
  • F03Cab inside temperature sensor open
  • F04Cab inside temperature sensor short
  • F09Alternate value is face
  • F10Mode 1 actuator drive circuit malfunction
  • F12Intake actuator drive circuit malfunction
  • F14Temperature actuator drive circuit malfunction.
  • MG640795Travel pressure switch fault detected.
  • P0037Low voltage reported by lambda probe.
  • P0047Turbocharger pressure control signal malfunction.
  • P0056Failure in the turbocharger pressure control signal.
  • P0077Damage to solenoid valve inlet line.
  • P0079Cable damage to electromagnetic exhaust valve.
  • P0100MAF sensor circuit fault detected.
  • P0101Mass air flow signal out of range.
  • P0102Reduced pulse from flow meter detected.
  • P0106Air pressure controller pulse out of range.
  • P0108Increased signal from air pressure sensor.
  • P0113High signal on intake air temperature line.
Looking for a different Hyundai code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Fault code lists by brand