HeavyEquipmentFix
Ask

Hyundai Fault Codes List: P0116 to TS35

Page 3 of 3 of the full Hyundai fault code list (251 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

Hyundai codes P0116 to TS35

  • P0116Signal from antifreeze temperature controller detected.
  • P0117Reduced pulse from antifreeze temperature controller.
  • P0118Increased signal from antifreeze temperature controller.
  • P0121Throttle position sensor wiring malfunction.
  • P0123Increased voltage on throttle position regulator.
  • P0132Increased signal from lambda probe bank 1.
  • P0134First lambda probe output pulse inactive.
  • P0138Increased output pulse from second oxygen sensor.
  • P0139Electrical circuit issue with oxygen sensor 2.
  • P0140No output pulse from second oxygen sensor.
  • P0156Second oxygen sensor malfunction.
  • P0183Increased pulse in temperature controller A circuit.
  • P0193Increased pulse from fuel pressure controller.
  • P0230Damage to primary control circuit power cable.
  • P0300Random misfire detected in engine.
  • P0320Damage to ignition switchgear power line.
  • P0325Malfunction in first knock sensor circuit.
  • P0326Incorrect pulse from first knock sensor.
  • P0339Signal issue from crankshaft position controller.
  • P0341Pulse issue from camshaft controller.
  • P0342Low signal from camshaft controller.
  • P0343High pulse level from camshaft controller.
  • P0350Damage or short circuit in ignition coil circuit.
  • P0404EGR controller pulse out of performance range.
  • P0405Low voltage on EGR controller line.
  • P0442Loose or faulty gas cap detected.
  • P0449Integrity issue with canister purge solenoid line.
  • P0489Low voltage on EGR sensor circuit.
  • P0500No pulse from vehicle speed controller.
  • P0501Incorrect signal from speed controller.
  • P0504Mismatch between sensor signals.
  • P0560Supply voltage too low.
  • P0562Low system supply voltage.
  • P0605Microprocessor module internal memory error.
  • P1326Excessive wear in connecting rod bearings.
  • P1847Malfunction in transmission control system
  • P2271Fault in engine operation detected
  • ST710345-1Engine oil pressure fault detected.
  • TS19Outdoor unit EEPROM parameter error
  • TS20Indoor/outdoor unit communication error
  • TS22Zero-crossing signal detection error
  • TS23Outdoor fan speed out of normal range
  • TS26Compressor discharge temperature sensor TP open/short circuit
  • TS27Indoor PCB/Display board communication error
  • TS28Refrigerant leak detected
  • TS29Current overload protection
  • TS30IPM malfunction or IGBT over-current protection
  • TS31Over voltage or low voltage protection
  • TS32High temperature or high pressure protection
  • TS34Inverter compressor drive error
  • TS35Low pressure protection
Looking for a different Hyundai code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Fault code lists by brand