HeavyEquipmentFix
Ask

Bobcat Fault Codes List: 38-45 to B1071-17

Page 2 of 24 of the full Bobcat fault code list (2,653 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

Bobcat codes 38-45 to B1071-17

  • 38-45Right forward drive solenoid error
  • 38-46Right reverse drive solenoid error
  • 38-47Front right steering solenoid error
  • 38-49Rear right steering solenoid error
  • 38-50Rear left steering solenoid error ON
  • 38-51Steering pressure solenoid error ON
  • 38-52Back-up alarm error ON
  • 39-04Left joystick no communication to controller
  • 40-04Right joystick no communication to controller
  • 47-218 volt sensor supply out of range high
  • 47-228 volt sensor supply out of range low
  • 60-21Rear auxiliary control out of range high
  • 60-22Rear auxiliary control out of range low
  • 60-23Rear auxiliary control not returning to neutral
  • 64-02Switched power relay error ON
  • 74-73Left hand panel system RX error
  • 80-02ACD output ‘A’ error ON
  • 81-02ACD output ‘B’ error ON
  • 82-02ACD output ‘C’ error ON
  • 83-02ACD output ‘D’ error ON
  • 84-02ACD output ‘E’ error ON
  • 86-02ACD output ‘G’ error ON
  • 87-02ACD output ‘H’ error ON
  • 90-02Service tool output ‘C’ error ON
  • 91-02Service tool output ‘D’ error ON
  • 92-02Service tool output ‘E’ error ON
  • 93-02Service tool output ‘F’ error ON
  • A0321Battery voltage high
  • A0322Battery voltage low
  • A0618Wheel Speed Out of Range
  • A0702Left interlocking sensor short to battery
  • A0703Left interlocking sensor short to ground/open
  • A0802Right interlocking sensor short to battery
  • A0803Right interlocking sensor short to ground/open
  • A0921Overload signal 1 high
  • A0922Overload signal 1 low
  • A1021Overload signal 2 high
  • A1022Overload signal 2 low
  • A1144Overload signals disagree
  • A3623ACD Controller Not Programmed
  • A46215 Volt Sensor Supply Out of Range High
  • A46225 Volt Sensor Supply Out of Range Low
  • A47218 Volt Sensor Supply Out of Range High
  • A47228 Volt Sensor Supply Out of Range Low
  • A7701Machine Key Active
  • A7901E-Stop Active
  • A8802Reversing Solenoid Error On
  • A8803Reversing Solenoid Error Off
  • B1001-96Key Switch Internal Failure
  • B1005-00Key Switch Multiple
  • B1030-11Front Work Light Left Short to Ground
  • B1030-12Front Work Light Left Short to Battery
  • B1030-13Front Work Light Left Not Connected
  • B1031-11Front Work Light Right Short to Ground
  • B1031-12Front Work Light Right Short to Battery
  • B1031-13Front Work Light Right Not Connected
  • B1034-11Rear Work Lights Circuit Short to Ground
  • B1034-12Rear Work Lights Circuit Short to Battery
  • B1034-13Rear Work Lights Circuit Open
  • B1034-14Rear Work Lights Error Off
  • B1035-12Rear Marker Light Short to Battery
  • B1035-14Rear Marker Light Short to Ground or Open Circuit
  • B1036-11Rear Marker Lights Circuit Short to Ground
  • B1036-12Rear Marker Lights Circuit Short to Battery
  • B1036-13Rear Marker Lights Circuit Open
  • B1036-14Rear Tail Lights Error Off
  • B1037-11Stop Lights Circuit Short to Ground
  • B1037-12Stop Lights Circuit Short to Battery
  • B1037-13Stop Lights Circuit Open
  • B1037-14Stop Lamp Short to Ground or Open Circuit
  • B1038-12Registration Plate Lamp Short to Battery
  • B1038-14Registration Plate Lamp Short to Ground or Open Circuit
  • B1039-11Side Lights Short to Ground
  • B1039-12Side Lights Short to Battery
  • B1039-13Side lights not connected.
  • B1040-12Buzzer circuit short to battery.
  • B1040-14Buzzer circuit short to ground or open.
  • B1041-12Backup alarm circuit short to battery.
  • B1041-14Backup alarm circuit short to ground or open.
  • B1042-12Horn output circuit short to battery.
  • B1042-14Horn output circuit short to ground or open.
  • B1050-12HVAC output circuit short to battery.
  • B1050-14HVAC output circuit short to ground or open.
  • B1051-93HVAC inside sensor error.
  • B1052-93HVAC device sensor error.
  • B1053-93HVAC coil sensor error.
  • B1054-12HVAC clutch output error on.
  • B1054-13HVAC clutch output open circuit.
  • B1054-19HVAC clutch output overcurrent.
  • B1055-93HVAC water valve error.
  • B1060-93Lift pedal error.
  • B1061-16Lift pedal sensor A out of range low.
  • B1061-17Lift pedal sensor A out of range high.
  • B1062-16Lift pedal position sensor B out of range low.
  • B1062-17Lift pedal position sensor B out of range high.
  • B1063-00Lift pedal sensor error.
  • B1070-09Tilt pedal failure.
  • B1070-93Tilt pedal error.
  • B1071-16Tilt pedal sensor A out of range low.
  • B1071-17Tilt pedal sensor A out of range high.
Looking for a different Bobcat code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Fault code lists by brand