HeavyEquipmentFix
Ask

Doosan Wheel Loader Fault Codes List: C68 to N94

Page 4 of 4 of the full Doosan Wheel Loader fault code list (343 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

Doosan Wheel Loader codes C68 to N94

  • C68Preheat Relay (Lowside Powerstage 13)
  • C7Short Circuit To Ground At Over Temperature Neutral Indicator
  • C72Preheat Relay (High side Power Stage 1)
  • C8Short Circuit To Battery Voltage At Over Temperature Neutral Indicator
  • C83Fuel Hi Pressure Pump (Current Controlled High side Power Stage 1 (CP3))
  • C9Open Circuit At Over Temperature Neutral Indicator
  • C92Monitoring Of Misfire Cylinder 1
  • C93Monitoring Of Misfire Cylinder 2
  • C94Monitoring Of Misfire Cylinder 3
  • C95Monitoring Of Misfire Cylinder 4
  • C96Monitoring Of Misfire Cylinder 5
  • C97Monitoring of Misfire Cylinder 1
  • C98Monitoring Of Misfire Multiple Cylinder
  • C99Monitoring Of Misfire Cylinder 3
  • CAEngine Retarder Configuration Time Out
  • CBERC1 Time Out
  • D1Short Circuit to Battery Voltage at Power Supply for Sensors
  • D2Short Circuit to Ground at Power Supply for Sensors
  • D3Low Power at Battery
  • D4High Power at Battery
  • D5Error at Switch 1 For Valve Power Supply VPS1
  • D6Error at Switch 2 For Valve Power Supply VPS2
  • E3Short Circuit to Battery Voltage at Display Output
  • E4Short Circuit to Ground at Display Output
  • E5DISPID1 Time Out
  • E6Illegal ID Request Via CAN
  • F1General EEPROM Fault
  • F2FWD Configuration Lost
  • F3Application Error
  • F4Limp Home Request
  • F5Clutch Failure
  • F6Clutch Adjustment Data Lost or Inch Pedal Calibration Data Lost
  • N117Fuel Pressure Monitoring MPROP HIGH
  • N17E/G Oil Temperature Sensor
  • N35Transmission Control (CAN DATA)
  • N37Can Module
  • N41Redundant Shutoff Path
  • N66Preheat Lamp (E/ G Low side Power Stage 2)
  • N71Diagnostic Lamp (Low side Power Stage 6)
  • N83Preheat Lamp (Lowside Power Stage 17)
  • N86Diagnostic Lamp (Lowside Power Stage 20)
  • N91System Startup Test For Shutoff Path
  • N94Small Signal Power Stage 1 (TD-signal)
Looking for a different Doosan Wheel Loader code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Other Doosan machine types

Fault code lists by brand