FPT Fault Codes List: F39F-1F to FBBF
Page 30 of 31 of the full FPT fault code list (3,033 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.
FPT codes F39F-1F to FBBF
- F39F-1FSCR Inducement
- F3A2Torque Limitation Due to Excessive Coolant Temperature
- F3A2-0Info: Torque Limitation Active
- F3A2-1FInfo: Torque Limitation Active
- F3AFSCR Inducement Warning Due to Distance or Time is Active - Level 5
- F3AF-0SCR Inducement
- F3EFStrong Torque Limitation From Injection System Active
- F3EF-0Info: Torque Limitation Active
- F3EF-1FInfo: Torque Limitation Active
- F4OBD/NOx - Group Error Path Urea Tank Empty
- F445Fuel Pressure Relief Valve is Open
- F445-0Pressure Relieve Valve
- F445-1FPressure Relieve Valve
- F476-0Injector Adjustment
- F476-1FInjector Adjustment
- F49FSCR Inducement: Level 1 (Torque Reduction), Triggered by DEF Dosing Interruption Fault
- F49F-0SCR Inducement
- F49F-1FSCR Inducement
- F4A2Torque Limitation Due to Excessive Exhaust Gas Temperature
- F4A2-0Info: Torque Limitation Active
- F4A2-1FInfo: Torque Limitation Active
- F4AFSCR Inducement Warning Due to Distance Time is Active - Level 6
- F4AF-0SCR Inducement
- F4EFTorque Limitation Caused By Engine Brake
- F4EF-0Info: Torque Limitation Active
- F4EF-1FInfo: Torque Limitation Active
- F523Engine Coolant Temperature Has Exceeded The Pre-Warning Threshold
- F523-0Info: Torque Limitation Active
- F523-1FInfo: Torque Limitation Active
- F561ECU After Run Power Interruption
- F561-0ECU Main Relay
- F561-1FECU Main Relay
- F576-0Injector Adjustment
- F576-1FInjector Adjustment
- F59FSCR Inducement: Level 3 (Creep Mode), Triggered by DEF Dosing Interruption Fault
- F59F-0SCR Inducement
- F59F-1FSCR Inducement
- F5A2Torque Limitation Due to Excessive Fuel Temperature
- F5A2-0Info: Torque Limitation Active
- F5A2-1FInfo: Torque Limitation Active
- F5AFSCR Inducement Warning Due to Distance Time is Active - Level 7
- F5AF-0SCR Inducement
- F623Engine Coolant Temperature Has Exceeded The Warning Threshold
- F623-0Info: Torque Limitation Active
- F623-1FInfo: Torque Limitation Active
- F676-0Injector Adjustment
- F676-1FInjector Adjustment
- F69FSCR Inducement: Warning, Triggered by DEF Dosing Interruption Fault
- F69F-0SCR Inducement
- F69F-1FSCR Inducement
- F6A2Torque Limitation Due to Excessive Intake Air Temperature
- F6A2-0Info: Torque Limitation Active
- F6A2-1FInfo: Torque Limitation Active
- F6AFSCR Inducement Warning Due to Distance or Time is Active - Level 8
- F6AF-0SCR Inducement
- F6EFTorque Limitation Caused by Performance Limiter
- F6EF-0Info: Torque Limitation Active
- F6EF-1FInfo: Torque Limitation Active
- F79F-0SCR Inducement
- F79F-1FSCR Inducement
- F7A2Torque Limitation Due to Excessive Oil Temperature
- F7A2-0Info: Torque Limitation Active
- F7A2-1FInfo: Torque Limitation Active
- F7EFTorque Limitation Caused By SCR Catalyst Protection
- F7EF-0Info: Torque Limitation Active
- F7EF-1FInfo: Torque Limitation Active
- F836Number of Injections is Limited by System
- F836-0Injector
- F836-1FInjector
- F89F-0SCR Inducement
- F89F-1FSCR Inducement
- F8A2Torque Limitation Due to Turbocharger Protection After Start
- F8A2-0Info: Torque Limitation Active
- F8A2-1FInfo: Torque Limitation Active
- F936Exceeded The Number of Injections For a Given Engine Speed
- F936-0Injector
- F936-1FInjector
- F99F-0SCR Inducement
- F99F-1FSCR Inducement
- F9BF-1FSCR Inducement
- FA2F-0Info: OBD Long Time Failure
- FA2F-1FSCR Inducement
- FA9FSCR Inducement: Level 1 (Torque Reduction), Triggered by DEF Quality Fault
- FA9F-0SCR Inducement
- FA9F-1FSCR Inducement
- FABFRemaining DEF is Below The Empty Threshold
- FABF-0SCR Reagent Tank Level
- FABF-1FSCR Reagent Tank Level
- FAEFTorque Limitation Active
- FAEF-0Info: Torque Limitation Active
- FAEF-1FInfo: Torque Limitation Active
- FB54Intake Air Humidity Sensor Voltage is Higher Than Expected
- FB54-0Intake Air Humidity Sensor
- FB54-1FIntake Air Humidity Sensor
- FB8FSCR Inducement Warning Due to Distance or Time is Active - Level 9
- FB8F-0SCR Inducement
- FB9FSCR Inducement: Level 3 (Creep Mode), Triggered by DEF Quality Fault
- FB9F-0SCR Inducement
- FB9F-1FSCR Inducement
- FBBFInducement System is Locked Due to 3 Detections in 40 hours. The system must be reset using the dealer service tool screen "Engine Restart Counter Reset".
Fault code lists by brand
- CAT8,286 codes
- Volvo6,508 codes
- New Holland Tractor3,475 codes
- Case IH2,992 codes
- Bobcat2,653 codes
- Challenger Tractor2,434 codes
- New Holland Combine2,274 codes
- John Deere Tractors1,884 codes
- Case Wheel Loader1,859 codes
- John Deere Engines1,853 codes
- Cummins1,847 codes
- Challenger Rubber Track Tractor1,747 codes
- Volvo Wheel Loader1,726 codes
- Deutz1,684 codes
Safety-critical: confirm before use
Safety first: park on level ground, stop the engine, and secure the machine before any inspection. Thresholds, component locations, wire numbers, fuse locations, and reset procedures can vary by model, configuration, and serial number. Confirm them in the service documentation for your exact machine.