HeavyEquipmentFix
Ask

New Holland Combine Fault Codes List: E0836 to E13D

Page 14 of 23 of the full New Holland Combine fault code list (2,274 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

New Holland Combine codes E0836 to E13D

  • E0836Side Operating Light Switch - Mechanical Out of Range
  • E0837Engine Compartment Light Switch - Mechanical Out of Range
  • E0838Sieve Light Switch - Mechanical Out of Range
  • E0839Rear Lights Switch - Mechanical Out of Range
  • E0840Undershield Light Switch - Mechanical Out of Range
  • E0841On/Off Work Lights Switch - Mechanical Out of Range
  • E0842On/Off Road Lights Switch - Mechanical Out of Range
  • E0843Stubble Lights Switch - Mechanical Out of Range
  • E0896Battery Voltage Sensing (Electrical), Shorted to Low Source
  • E0897Temperature Sensor After Catalyst (Electrical), Shorted to High Source
  • E0898Temperature Sensor Before Catalyst Range Fault (Electrical) Short to High Source
  • E0899Sensor Supply 2 (5V Internal; for Urea Pressure Sensors) Shorted to High Source
  • E0900Urea Pressure Sensor in Box Range Error (Electrical) Shorted to High Source
  • E0901Urea Temperature Sensor in Box (Electrical) Shorted to High Source
  • E0902Voltage Supply Internal Heaters 1 (UB1) Electrical Short to High Source
  • E0903Voltage Supply 2 - Tube Heaters (Ub2) Electrical, Shorted to High Source
  • E0904Voltage Supply 3 - Coolant Control Valve and Reverting Valve (Urea Purge Function) (UB3) Electrical - Shorted to High Source
  • E0905Selective Catalytic Reduction (SCR) Dosing Valve/Pump Motor Dosing Control Unit (DCU) Supply Voltage - Shorted to High Source
  • E0906Urea Level Sensor (Electrical) - Shorted to High Source
  • E0907DEF Pressure Too Low During System Operation or Dosing
  • E0908Dosing Valve (Electrical), Mechanical Out of Range
  • E0909Urea Pump Speed - Mechanical Out of Range
  • E0910Cooling Control Valve Short Circuit to Ubat or Open Load Unidentified Failure
  • E0911Cooling Control Valve Short Circuit to Ground Unidentified Failure
  • E0912Reverting Valve (4-2Way Valve) Electrically, Shorted to High Source
  • E0913Urea Pressure Incorrect During Start up
  • E0914DEF Tank Coolant Control Valve (Electrical) Short Circuit
  • E0915Temperature After Catalyst Too Low, Shorted to High Source
  • E0916Urea Pressure Too Low at System Start - Data Incorrect
  • E0917Urea Pressure Too High Above 6.5 Bar - Data Incorrect
  • E0918Urea Temperature in Pump Module Out of Range Mechanical Out of Range
  • E0919Urea Temperature in Tank Out of Range, Mechanical Out of Range
  • E0920System Frozen and Not Free in Time - Abnormal Rate of Change
  • E0921Coolant Control Valve Mechanically, Line Disconnected
  • E0922Reverting Valve - Mechanical Out of Range
  • E0923Battery Voltage (Actual Value) - Shorted to High Source
  • E0924Urea Pressure Too Low (in "Commissioning" Status) Data Incorrect
  • E0925Urea Temperature Too Low During Commissioning, Data Incorrect
  • E0928Empty Urea Tank, Mechanical Out of Range
  • E0930Urea Pressure Sensor Plausibility Error (Checked During System Startup) - Bad Intelligent Device
  • E0931DEF Box Temperature Sensor Plausibility Error Bad Intelligent Device
  • E0932Urea Tank Temperature Sensor Plausibility Error (Dynamic/Static) - Bad Intelligent Device
  • E0933Back Flow Line Clogged - Mechanical Out of Range
  • E0935Pressure Line Blocked - Mechanical Out of Range
  • E0936Controller Area Network (CAN) Receive Frame E2SCR(Diesel Exhaust Fluid DEF Quantity Not in Range)
  • E0937Controller Area Network (CAN) Receive Frame EEC1 Engine Torque Not in Range
  • E0938Controller Area Network (CAN) Receive Frame ET1 (Oil and Water Temperature Engine) - Bad Intelligent Device
  • E0939Urea Tank Level Error (CAN Message or Electrical with Real Sensor), Shorted to High Source
  • E0940Ambient Temperature: Controller Area Network (CAN) Signal Ambient Air Temperature Not in Range
  • E0941EEPROM/Checksum Failures - Mechanical Out of Range
  • E0942Ignition "On" Signal K15
  • E0943Main Relay Shut Off Too Early Before EEPROM Update
  • E0944Too High Diesel Exhaust Fluid (DEF) Temperature in Pump Module
  • E0945Group Error Path Urea Injection Control - Bad Intelligent Device
  • E0946Group Error Path Air Control - Bad Intelligent Device
  • E0947Group Error Path Catalyst Temperature - Bad Intelligent Device
  • E0948Group Error Path NOx Exceeded
  • E0949Group Error Path Urea Tank Empty - Bad Intelligent Device
  • E0950Low Diesel Exhaust Fluid (DEF) Level 1 (Warning) Valid Below Normal
  • E0951Low Diesel Exhaust Fluid (DEF) Level 2 - Empty DEF Tank
  • E1056Track Right, Rear, Displacement Sensor - Shorted to High Source
  • E1064Track Left, Rear, Displacement Sensor - Shorted to High Source
  • E1065Track Right, Front, Displacement Sensor - Shorted to High Source
  • E1066Track Left, Front, Displacement Sensor - Shorted to High Source
  • E1067Track Left, Tensioning Pressure Sensor - Shorted to High Source
  • E1068Track Right, Tensioning Pressure Sensor - Shorted to High Source
  • E1135Track Left, Shutoff Valve - Shorted to High Source
  • E1136Track Right, Rear, Down Valve - Shorted to High Source
  • E1137Track Right, Rear, Up Valve - Shorted to High Source
  • E1138Track Left, Rear, Up Valve - Shorted to High Source
  • E1141Track Right, Shutoff Valve - Shorted to High Source
  • E1142Tracks - Discharge Valve - Shorted to High Source
  • E1148Track Left, Front, Down Valve - Shorted to High Source
  • E1149Track Right, Front, Up Valve - Shorted to High Source
  • E1154Track Left, Rear, Down Valve - Shorted to High Source
  • E1155Track Left, Front, Up Valve - Shorted to High Source
  • E1156Track Right, Front, Down Valve - Shorted to High Source
  • E1191UCM3 12VA Voltage - Shorted to High Source
  • E1192UCM3 12VB Voltage - Shorted to High Source
  • E1193UCM3 12VD Voltage - Shorted to High Source
  • E1194UCM3 12VF1 Voltage - Shorted to High Source
  • E1196UCM3 12VF3 Voltage - Shorted to High Source
  • E1197UCM3 12VH Voltage - Shorted to High Source
  • E1198UCM3 12VH1 Voltage - Shorted to High Source
  • E1199UCM3 12VM Voltage - Shorted to High Source
  • E1200UCM3 12VP Voltage - Shorted to High Source
  • E1201UCM3 12VR Voltage - Shorted to High Source
  • E1202UCM3 12VS1 Voltage - Shorted to High Source
  • E1203UCM3 12VS2 Voltage - Shorted to High Source
  • E1204UCM3 12VT1 Voltage - Shorted to High Source
  • E1205UCM3 12VU1 Voltage - Shorted to High Source
  • E1206UCM3 12VU2 Voltage - Shorted to High Source
  • E1208UCM3 5VREF2_Out Voltage - Shorted to High Source
  • E126ECU Internal Failure - Injector CY33X Component
  • E1281ASP Bottom Sensor (One) Line Disconnected
  • E1283ASP Bottom Sensor (Both) Shorted to High Source
  • E1284ASP Stonedoor Output - Unidentified Failure Code
  • E1286ASP Sensitivity Off Special Instructions
  • E1287ASP Sensitivity On Special Instructions
  • E13DECU Internal Failure - Loss of Synchronization to MM from CPU
Looking for a different New Holland Combine code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Other New Holland machine types

Fault code lists by brand