HeavyEquipmentFix
Ask

Bobcat Fault Codes List: H2005 to H9004

Page 12 of 24 of the full Bobcat fault code list (2,653 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

Bobcat codes H2005 to H9004

  • H2005Rear Aux. Valve Short to Battery
  • H2006Rear Aux. Valve Short to Ground
  • H2007Rear Aux. Valve Open Circuit
  • H2105Reverse Fan Solenoid Short to Battery
  • H2106Reverse Fan Solenoid Short to Ground
  • H2107Reverse Fan Solenoid Open Circuit
  • H2132Reverse Fan Solenoid Overcurrent
  • H2205Rear Aux. Activation Valve Short to Battery
  • H2206Rear Aux. Activation Valve Short to Ground
  • H2207Rear Aux. Activation Valve Open Circuit
  • H2232Rear Aux. Activation Valve Overcurrent
  • H2328Rear Aux. Dashboard Switch Error
  • H2505Rear Base Lock Solenoid Short to Battery
  • H2506Rear Base Lock Solenoid Short to Ground
  • H2507Diverter #2 Open Circuit
  • H2521Angle Blade Control Switch High Range
  • H2522Angle Blade Control Switch Low Range
  • H2524Angle Blade Control Switch Not Neutral
  • H2832Diverter Output Overcurrent
  • H2848Diverter Multiple Input
  • H3204Workgroup controller No communication
  • H3304Gateway controller No communication
  • H3404Display controller No communication
  • H3523Programming or constant data invalid
  • H3528Controller failure
  • H3596Interrupted power
  • H3604Engine controller No communication
  • H3702Power Bobtach Up Solenoid Error On
  • H3704Drive controller No communication
  • H3904Left Joystick in Error
  • H3912Left Joystick Thumb Switch Not in Neutral
  • H3928Left CAN Joystick Internal Failure
  • H3948Left CAN Joystick Multiple
  • H4004Right Joystick in Error
  • H4012Right Joystick Thumb Switch Not in Neutral
  • H4028Right CAN Joystick Internal Failure
  • H4048Right CAN Joystick Multiple
  • H4302Horn Relay Error On
  • H4303Horn Relay Error Off
  • H4423Deluxe MX Controller Not Programmed
  • H4497Auxiliary Controller Programmed
  • H46215V sensor supply out of range high.
  • H46225V sensor supply out of range low.
  • H47228 Volt Sensor Supply Out of Range Low
  • H48215 Volt Sensor Supply Out of Range High
  • H48225 Volt Sensor Supply Out of Range Low
  • H5705Angle Blade Aux 4 Base short to battery.
  • H5706Angle Blade Aux 4 Base short to ground.
  • H5707Angle Blade Aux 4 Base open circuit.
  • H5732Angle Blade Aux 4 Base overcurrent.
  • H5805Angle Blade Aux 4 Rod short to battery.
  • H5806Angle Blade Aux 4 Rod short to ground.
  • H5807Angle Blade Aux 4 Rod open circuit.
  • H5832Angle Blade Aux 4 Rod overcurrent.
  • H7002Boom drain output error ON.
  • H7003Boom drain output error OFF.
  • H7007Boom drain output open circuit.
  • H7033Boom drain output internal failure.
  • H7102Boom drain relay feedback error ON.
  • H7103Boom drain relay feedback error OFF.
  • H7205Boom suspension output short to battery.
  • H7206Boom suspension output short to ground.
  • H7207Boom suspension open circuit.
  • H7232Boom suspension overcurrent.
  • H7233Boom suspension output internal failure.
  • H7428Boom suspension error.
  • H7604Left Display Panel No Communication
  • H7705Boom float output short to battery.
  • H7706Boom float output short to ground.
  • H7707Boom float open circuit.
  • H7732Boom float overcurrent.
  • H7902Door unlock error on.
  • H7903Door unlock error off.
  • H8002ACD output A error on.
  • H8003ACD output A error off.
  • H8102ACD output B error on.
  • H8103ACD output B error off.
  • H8110LS pump inlet pressure high.
  • H8121LS pump inlet pressure out of range high.
  • H8122LS pump inlet pressure out of range low.
  • H8202ACD output C error on.
  • H8203ACD output C error off.
  • H8209LS pump outlet pressure low.
  • H8221LS pump outlet pressure out of range high.
  • H8222LS pump outlet pressure out of range low.
  • H8302ACD output D error on.
  • H8303ACD output D error off.
  • H8305LS pump displacement control valve short to battery.
  • H8306LS pump displacement control valve short to ground.
  • H8307LS pump displacement control open circuit.
  • H8332LS pump displacement control overcurrent.
  • H8402ACD output E error on.
  • H8403ACD output E error off.
  • H8502ACD output F error on.
  • H8503ACD output F error off.
  • H8602ACD output G error on.
  • H8603ACD output G error off.
  • H8702ACD output H error on.
  • H8703ACD output H error off.
  • H9004Press to Operate Loader Keypad No Communication
Looking for a different Bobcat code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Fault code lists by brand