Challenger Rubber Track Tractor Fault Codes List: 0E.1.A2 to 1D.1.02
Page 7 of 18 of the full Challenger Rubber Track Tractor fault code list (1,747 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.
Challenger Rubber Track Tractor codes 0E.1.A2 to 1D.1.02
- 0E.1.A2What Bias Value More Than 3°
- 0E.1.A3Tracking Line Not Available
- 0F.1.01Left Tail Light 1 Defective
- 0F.1.02Left Tail Light 1 Defective
- 0F.1.03Left Tail Light 2 Defective
- 0F.1.04Left Tail Light 2 Defective
- 0F.1.05High Beam Headlights Defective
- 0F.1.06Low Beam Headlights Defective
- 0F.1.07Main Beam Headlight Defective
- 0F.1.08Low Beam Warning Light Defective
- 0F.1.09Left Front Blinker Defective
- 0F.1.0ARight Front Blinker Defective
- 0F.1.0BLeft Rear Blinker Defective
- 0F.1.0CRight Rear Blinker Defective
- 0F.1.10Front Washing System Defective
- 0F.1.11Rear Washing System Defective
- 0F.1.12Nozzle Heater Defective
- 0F.1.13Light 58 Position Indicator Defective
- 0F.1.15Electrical Control Unit Defective
- 0F.1.16Electrical Control Unit
- 0F.1.17Left Brake Light Defective
- 0F.1.18Right Brake Light Defective
- 0F.1.19Sensor Supply Voltage Too High or Too Low
- 0F.1.1AMain Supply Voltage Too High
- 0F.1.1BProcessor Supply Voltage Too High or Too Low
- 0F.1.1DFront Wiper Defective
- 0F.1.1ERear Wiper Defective
- 0F.1.1FTank Pump Defective
- 0F.1.20No Response From the Instrument Cluster
- 0F.1.21Checksum Error Over the Address Range: 0-128d
- 0F.1.22Checksum Error Over the Address Range of the Diagnostic Parameters
- 0F.1.23No Response From the Transmission
- 0F.1.24No Response From Brake Control
- 0F.1.25No Response From the MFA
- 0F.1.26No Response From the Steering Angle
- 0F.1.27Checksum Error Over the Address Range of the Module Parameters
- 0F.1.28Defective Hardware
- 0F.1.2BMirror Heater Defective
- 0F.1.2CLeft Valve Support no Function
- 0F.1.2DRight Valve Support no Function
- 0F.1.2FDG Initialization
- 0F.1.30Daytime Running Light Defective
- 0F.1.31Side Marker Lights Defective
- 0F.1.32Third Brake Light Defective
- 0F.1.33Right Washer Defective
- 0F.1.34Right Wiper Defective
- 0F.1.35Corner Lights Defective
- 0F.1.36Interior Light Defective
- 0F.1.37Initial Lighting Defective
- 0F.1.39Mirror Adjustment Defective
- 0F.2.0DBlinker Box Defective
- 0F.2.0ERight Turn Signal Box Defective
- 0F.2.0FCan Terminal 54 Defective
- 0F.2.14Left Can Terminal 58 Defective
- 0F.2.1CRight Can Terminal 58 Defective
- 0F.2.38Can Terminal 58 Outputs Not Plausible to Each Other
- 10.1.15HVAC Missing LCP Defective
- 10.1.36Blow Temperature Sensor 1
- 10.1.37Inner Space Temperature Sensor Defective
- 10.1.38Evaporator Temperature Sensor Defective
- 10.1.39Outside Temperature Sensor Defective
- 10.1.3EHigh/Low Pressure
- 10.1.EFMain Blower 2 Defective (Overheating Protection or Blocking Protection)
- 10.1.FEDefective Hardware
- 17.1.E0CAN Communication between the E Box and the CAN joystick is interrupted
- 18.0.00Steering with No Command
- 18.0.01No Steering with Command
- 18.0.02Steering Wrong Direction
- 18.0.03Loss of Steering Control Pressure
- 18.0.04Electric Supply Operational Out of Range
- 18.0.06Engine Stalled
- 18.0.09Two Steering Wheel Sensor Fail
- 18.0.0AThree Steering Wheel Sensor Fail
- 18.0.0BNo Two Steering Wheel Sensors Match
- 18.0.0CLow Side of Steering Solenoids Shorted Low or Open Circuit
- 18.0.0EHigh Side of Steering Solenoid Shorted Low or Open Circuit
- 18.0.0FHigh Side of Steering Solenoid Shorted to High Source
- 18.0.10High Side of Steering Solenoid Open Circuit
- 18.0.16Secondary Steer Solenoid Shorted Low or Open Circuit
- 18.0.17Secondary Steering Solenoid Shorted Too High Source
- 18.0.19Steering Wheel Calibrations Implausible
- 18.0.1ASteering Solenoid Calibration Failure
- 18.0.23Gage Calibration Implausible
- 18.1.08One Steering Wheel Sensor Fails
- 18.1.11Steering Error Exceeds Normal Limits
- 18.1.13Steering Motor Speed Implausible
- 18.1.1CCalibration EEPROM Checksum Error
- 18.1.20Steering Pressure Sensor Circuit Defective
- 18.1.21MFA On Road Button Defective
- 18.1.IBParameter EEPROM Checksum Error
- 18.1.IDOne Steer Wheel Sensor Does Not Match
- 18.1.IEEEPROM Read Error
- 18.2.18Unsupported Error
- 18.2.1 FShow Picture in the Dash
- 1D.0.00Engine Oil Pressure
- 1D.0.09Fan Drive Hydraulic Oil Temperature Greater Than 1°C
- 1D.0.62Engine Shutdown
- 1D.0.A1Rail Pressure Error
- 1D.1.01General Fault Engine or Exhaust After Treatment System
- 1D.1.02Engine Oil Pressure Sensor
Other Challenger machine types
Fault code lists by brand
- CAT8,286 codes
- Volvo6,508 codes
- New Holland Tractor3,475 codes
- FPT3,033 codes
- Case IH2,992 codes
- Bobcat2,653 codes
- New Holland Combine2,274 codes
- John Deere Tractors1,884 codes
- Case Wheel Loader1,859 codes
- John Deere Engines1,853 codes
- Cummins1,847 codes
- Volvo Wheel Loader1,726 codes
- Deutz1,684 codes
- Perkins1,523 codes
Safety-critical: confirm before use
Safety first: park on level ground, stop the engine, and secure the machine before any inspection. Thresholds, component locations, wire numbers, fuse locations, and reset procedures can vary by model, configuration, and serial number. Confirm them in the service documentation for your exact machine.