HeavyEquipmentFix
Ask

New Holland Tractor Fault Codes List: 4176 to 4349

Page 25 of 35 of the full New Holland Tractor fault code list (3,475 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

New Holland Tractor codes 4176 to 4349

  • 4176Rear EHR Timer Switch No.1/No.2 - Not Connected
  • 4177Rear EHR Control No.3 Not Calibrated [A] & [B]
  • 4178EHR Control No.3 Open Circuit or Short to GND
  • 4179EHR Control No.3 Short Circuit to Power Supply 5 - 12V
  • 4180Rear EHR Control No.4 Not Calibrated [A] & [B]
  • 4181Rear EHR Control No.4 - Open Circuit
  • 4182Rear EHR Control No.4 - Short Circuit
  • 4183Rear EHR Timer Switch No.3/No.4 - Not Connected
  • 4184EHR Joystick Potentiometer X - Open Circuit
  • 4185EHR Joystick Potentiometer X - Short Circuit
  • 4186EHR Joystick Potentiometer Y - Open Circuit
  • 4187EHR Joystick Potentiometer Y - Short Circuit
  • 4190Rear Remote No.1 No Communications [A] & [B]
  • 4191Rear Remote No.2 No Communications [A] & [B]
  • 4192Rear Remote No.3 No Communications [A] & [B]
  • 4193Rear Remote No.4 No Communications [A] & [B]
  • 4194Rear EHR No.1 Motor Mode Switch Faulty
  • 4195Rear EHR No.2 Motor Mode Switch Faulty
  • 4196Rear EHR No.3 Motor Mode Switch Faulty
  • 4197Rear EHR No.4 Motor Mode Switch Faulty
  • 4198Rear Remote No.5 No Communications [A] & [B]
  • 4199Joystick Detected but Selection Switch Not Detected
  • 41OSRear Remote No. 1 - Over Voltage
  • 42Engine Speed Too Low for Hitch Lower Calibration
  • 4200Selection Switch Detected but Joystick Not Detected
  • 4203EHR Control No.1 Lever Tracks Implausibility
  • 4204EHR Control No.2 Lever Tracks Implausibility
  • 4205EHR Control No.3 Lever Tracks Implausibility
  • 4206EHR Joystick - Position Error
  • 4212Camshaft Speed Sensor Values are Not Plausible
  • 4216Rear Remote No. 1 - Spool Not Calibrated
  • 4217Rear Remote No. 2 - Spool Not Calibrated
  • 4218Rear Remote No. 3 - Spool Not Calibrated
  • 4219Rear Remote No. 4 - Spool Not Calibrated
  • 4220Rear Remote No. 5 - Spool Not Calibrated
  • 4232Rear EHR Fender Switch Active at Key On
  • 4243Left-Hand External Fender Switch - Open Circuit or Short to Ground
  • 4244Left-Hand External Fender Switch - Short to 12V
  • 4245Left-Hand External Fender Switch - Unexpected Value
  • 4246Right-Hand External Fender Switch - Open Circuit or Short to Ground
  • 4247Right-Hand External Fender Switch - Short to 12V
  • 4248Right-Hand External Fender Switch - Unexpected Value
  • 4249Front Coupler Switch - Open Circuit or Short to Ground
  • 4250Front Coupler Switch - Short to 12V
  • 4251Front Coupler Switch - Unexpected Value
  • 4252Right-Hand External Fender Switch - Active at Key On
  • 4253Left-Hand External Fender Switch - Active at Key On
  • 4254Front Coupler Switch - Active at Key On
  • 426Level 2 Monitoring: Reported Under Voltage of Supply
  • 43Hitch is Calibrated as Position Only
  • 4300Top Link Switch Not Fitted
  • 4301Rear Remote No. 6 - No Control Message Received
  • 4302Rear Remote No. 6 - Control Message Not Plausible
  • 4303Rear Remote No. 6 - EEPROM Error
  • 4304Rear Remote No. 6 - Not Commanded Neutral on Power-Up
  • 4305Rear Remote No. 6 - Under Voltage
  • 4306Rear Remote No. 6 - Over Voltage
  • 4307Rear Remote No. 6 - Spool Movement Too Low
  • 4308Rear Remote No. 6 - Spool Movement Too High
  • 4309Rear Remote No. 6 - Float Position Not Reached
  • 4310Rear Remote No. 6 - Manually Operated
  • 4311Rear Remote No. 6 - Driver Faulty
  • 4312Rear Remote No. 6 - Internal Position Sensor Faulty
  • 4313Rear Remote No. 6 - Unable to Reach Neutral
  • 4314Rear Remote No. 6 - Spool Not in Neutral at Key On
  • 4315Rear Remote No. 7 - No Control Message Received
  • 4316Rear Remote No. 7 - Control Message Not Plausible
  • 4317Rear Remote No. 7 - EEPROM Error
  • 4318Rear Remote No. 7 - Not Commanded Neutral on Power-Up
  • 4319Rear Remote No. 7 - Under Voltage
  • 4320Rear Remote No. 7 - Over Voltage
  • 4321Rear Remote No. 7 - Spool Movement Too Low
  • 4322Rear Remote No. 7 - Spool Movement Too High
  • 4323Rear Remote No. 7 - Float Position Not Reached
  • 4324Rear Remote No. 7 - Manually Operated
  • 4325Rear Remote No. 7 - Driver Faulty
  • 4326Rear Remote No. 7 - Internal Position Sensor Faulty
  • 4327Rear Remote No. 7 - Unable to Reach Neutral
  • 4328Rear Remote No. 7 -Spool Not in Neutral at Key On
  • 4329Rear Remote No. 8 - No Control Message Received
  • 4330Rear Remote No. 8 - Control Message Not Plausible
  • 4331Rear Remote No. 8 - EEPROM Error
  • 4332Rear Remote No. 8 - Not Commanded Neutral on Power-Up
  • 4333Rear Remote No. 8 - Under Voltage
  • 4334Rear Remote No. 8 - Over Voltage
  • 4335Rear Remote No. 8 - Spool Movement Too Low
  • 4336Rear Remote No. 8 - Spool Movement Too High
  • 4337Rear Remote No. 8 - Float Position Not Reached
  • 4338Rear Remote No. 8 - Manually Operated
  • 4339Rear Remote No. 8 - Driver Faulty
  • 4340Rear Remote No. 8 - Internal Position Sensor Faulty
  • 4341Rear Remote No. 8 - Unable to Reach Neutral
  • 4342Rear Remote No. 8 - Spool Not in Neutral at Key On
  • 4343Rear Remote No. 5 - Not Calibrated
  • 4344Rear Remote No. 6 - Not Calibrated
  • 4345Rear Remote No. 7 - Not Calibrated
  • 4346Rear Remote No. 8 - Not Calibrated
  • 4347Rear Remote No. 6 - No Communications
  • 4348Rear Remote No. 7 - No Communications
  • 4349Rear Remote No. 8 - No Communications
Looking for a different New Holland Tractor code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Other New Holland machine types

Fault code lists by brand