HeavyEquipmentFix
Ask

New Holland Tractor Fault Codes List: 12631 to 13012

Page 4 of 35 of the full New Holland Tractor fault code list (3,475 codes). Each entry is the code as the machine reports it and what the manufacturer data says it means.

New Holland Tractor codes 12631 to 13012

  • 12631Front Right Wheel Speed Sensor - Air Gap (No Signal)
  • 12632Rear Left Wheel Speed Sensor - Damaged Sensor Ring
  • 12633Rear Right Wheel Speed Sensor - Damaged Sensor Ring
  • 12634Front Left Wheel Speed Sensor - Damaged Sensor Ring
  • 12635Front Right Wheel Speed Sensor - Damaged Sensor Ring
  • 12636Rear Left Wheel Speed Sensor - Wheel Diameter Incorrect
  • 12637Rear Right Wheel Speed Sensor - Wheel Diameter Incorrect
  • 12638Front Left Wheel Speed Sensor - Wheel Diameter Incorrect
  • 12639Front Right Wheel Speed Sensor - Wheel Diameter Incorrect
  • 12640Pneumatic Output - Delivery Port - Rear Right - Backup Solenoid Electrical Error
  • 12641Pneumatic Output - Delivery Port - Rear Right - Load Solenoid Electrical Error
  • 12642Pneumatic Output - Delivery Port - Rear Left - Exhaust Solenoid Electrical Error
  • 12643Pneumatic Output - Delivery Port - Rear Left - Backup Solenoid Electrical Error
  • 12644Pneumatic Output - Delivery Port Load Solenoid Electrical Error
  • 12645Pneumatic Output - Delivery Port Exhaust Solenoid Electrical Error
  • 12646P2 Backup/Hold Solenoid Electrical Error
  • 12647P2 Exhaust Solenoid Electrical Error
  • 12648AUX3 Internal Charge-Pump Error
  • 12649AUX3 Internal Charge-Pump Error (EM Supply)
  • 12650Pneumatic Input - Supply Port Pressure Sensor Electrical Error
  • 12651Pneumatic Input - Supply Port Pressure Dynamic Error, (Output Pressure (Pneumatic Output - Delivery Port Rear Right or Left) Higher than Pneumatic Input Supply Port Pressure for 500ms)
  • 12652Pneumatic Input - Control Port Pressure Sensor Electrical Error
  • 12653Pneumatic Input - Control Port Pressure Dynamic Error
  • 12654Pneumatic Input - Suspension/Auxiliary Input Port Pressure Sensor Electrical Error
  • 12655Pneumatic Output - Delivery Port - Rear Right - Pressure Sensor Electrical Error
  • 12656Pneumatic Output - Delivery Port - Rear Right - Pressure Dynamic Error
  • 12657Pneumatic Output - Delivery Port - Rear Left - Pressure Sensor Electrical Error
  • 12658Pneumatic Output - Delivery Port - Rear Left - Pressure Dynamic Error
  • 12659Pressure Sensor Cross Check - ADC Values Implausible
  • 12660lnternal Controller Communication - Checksum Error
  • 12661lnternal Controller Fault - Illegal Interrupt Occurred
  • 12662lnternal Controller Fault - Illegal Reset Occurred
  • 12663lnternal Controller Fault - Memory (ROM) Test Error
  • 12664lnternal Controller Fault - Memory (RAM) Test Error
  • 12665lnternal Controller Fault - ALU Error
  • 12666lnternal Controller Fault - Memory Stack Underflow
  • 12667lnternal Controller Fault - Memory Stack Overflow
  • 12668lnternal Controller Fault - Internal Controller Communication Checksum Error
  • 12669lnternal Controller Fault - Internal Controller Communication Timeout Occurred
  • 12670lnternal Controller Fault - Time Between 2 ICC Data Telegrams Too Long or Too Short
  • 12671lnternal Controller Fault - Number of ICC Communications in 1 Second Out of Range
  • 12672Valve Plausibility Monitoring - Illegal Valve Activation Detected
  • 12673Valve Plausibility Monitoring - Dynamic Fault
  • 12674Valve Plausibility Monitoring - ABS Activation; Detected in Backup Controller
  • 12675Valve Plausibility Monitoring - ABS Activation; Detected in Main Controller
  • 12676High Voltage - Greater Than 32 Volts
  • 12677Low Voltage - Disable System Functions
  • 12678Low Voltage Whilst Moving - Disable System Functions
  • 12679Voltage Supply Line Resistance High
  • 12680lgnition GND Missing/Open Circuit (Pin 3 in Power Supply Connector)
  • 12681Valve Supply Missing (Pin 1 in Power Supply Connector)
  • 12682Valve Supply Missing (Pin 1 in Power Supply Connector)
  • 12684System Pressure Below 2.5 Bar for 0.5 Seconds While Moving
  • 12685Service Brake Application Too Long
  • 12686Acceleration Sensor Self Test Failure - Sensor is Broken
  • 12687Pneumatic Output - Delivery Port - Rear Right - Leakage (e.g. While Trying to Hold Pressure)
  • 12688Pneumatic Output - Delivery Port - Rear Right - Uncontrollable (If Load/Exhaust Valves are Activated for More Than 4Hz, DTC is Set)
  • 12689Pneumatic Output - Delivery Port - Rear Right - Backup Valve (Pneumatic Input - Control Port Cannot Exhaust Modulated Air Command)
  • 12690Pneumatic Output - Delivery Port - Rear Left - Leakage (e.g. While Trying to Hold Pressure)
  • 12691Pneumatic output - Delivery Port - Rear Left - Uncontrollable (If Load/Exhaust Valves are Activated for More than 4Hz, DTC is Set)
  • 12692Pneumatic Output - Delivery Port - Rear Left - Backup Valve (Pneumatic Input - Control Port Cannot Exhaust Modulated Air Command)
  • 12693Pneumatic Input - Supply Port Implausible During Valves Activity (Complementary to Pneumatic Input - Supply Port Dynamic Check)
  • 12694EEPROM Configuration is Corrupted
  • 12695ABS Activity Too Long (Add. Info = 0) or Too Frequent (Add. Info = 1)
  • 12696Default Configuring in Flash Corrupted (Checksum Error)
  • 12697ECU Has Not Been Configured
  • 12698EOL CNH Test Not Done
  • 12699CAN Message Missing
  • 127Current Sensed When the Aux #2 Driver is Off, Retract/Lower Coil Shorted to 12 Volts
  • 12700CAN Data Missing
  • 12701EBM in Factory Test Mode (Reset by KB During KB EOL Test) - Don't Use on Public Roads
  • 12702CAN Communication Error - eXBR1 Checksum or Message Counter Error
  • 12703CAN Communication Error - eXBR1 Control Mode Error
  • 12704CAN Communication Error - eXBR1 Requested Pressure Out of Range
  • 12705CAN Communication Error - eXBR1 Target Wheel Speed Out of Range
  • 12706CAN Communication Error - eXBR1 Inconsistent Parameters
  • 12707CAN Communication Error - eXBR1 Pressure Plausibility Error
  • 12708CAN Communication Error - eXBR1 Activation Time too Long (10 min)
  • 12709CAN Communication Error - eXBR1 Message Missing
  • 12710Wheel Diameter on CAN is Out of Range
  • 12711Pneumatic Input - Suspension/Auxiliary Input Port Pressure Dynamic Error
  • 12712P2 Leakage
  • 12713P2 Uncontrollable
  • 128Aux #2 Driver is On and No Current is Sensed, Retract/Lower Coil Open or Shorted to Ground
  • 129Current Sensed When the Aux #2 Driver is Off, Extend/Raise Coil Shorted to 12 Volts
  • 12999Unknown EBM Fault Code
  • 12DAToo High Efficiency of Catalyst System
  • 13Both Rising and Lowering Electrohydraulic Remote Valves Short Circuit
  • 130Aux #2 Driver is On and No Current is Sensed, Extend/Raise Coil Open or Shorted to Ground
  • 13001Reference Voltage 5VREF1 - Voltage Too Low
  • 13002Reference Voltage 5VREF1 - Voltage Too High
  • 13003Reference Voltage 5VREF2 - Voltage Too Low
  • 13004Reference Voltage 5VREF2 - Voltage Too High
  • 13005Reference Voltage 5VREF3 - Voltage Too Low
  • 13006Reference Voltage 5VREF3 - Voltage Too High
  • 13007Reference Voltage 8V5REF - Voltage Too Low
  • 13008Reference Voltage 8V5REF - Voltage Too High
  • 13010Engine Coolant Temperature Sensor Failed in Engine Controller
  • 13011Engine Coolant Temperature Sensor Signal Too Low
  • 13012SP (Transmission Electronic Control Module) +12VF Too High
Looking for a different New Holland Tractor code?Search the full fault-code database, or hand the code to the AI assistant for a plain-English explanation.

Other New Holland machine types

Fault code lists by brand